A kitchen knife is drawn back and forth across a wet whetstone, slowly, until a grey paste of steel and stone gathers under the edge. For years this was Cho Sang-jin's work: sharpening other people's knives, and seeing what had gone wrong with them. Often the trouble was not the edge at all. It was inside the handle, where water had crept in around the blade and stayed.
Cho makes the Korean Damascus kitchen knife he is known for under the name Kalcheonji. A Damascus knife is a blade built in layers: a hard steel core that forms the cutting edge, wrapped in dozens of thinner layers of softer stainless steel that protect it and give the blade its rippled pattern. His knives carry 67 or 73 of those layers, depending on the line, and every edge is finished by hand on a wet whetstone.
The pattern on the blade is what catches the eye. The part that says the most about how he works is one you will never see: the inside of the handle. To understand why he spends days on it, start where Cho did, at the sharpening stone.
A Sharpener Who Went On to Make Knives
Cho started out as a sharpener. He patented a mobile wet-sharpening system and built a sharpening business around it, taking the stone to kitchens instead of asking cooks to send their knives away. He called the business Kalcheonji, a name built on kal, the Korean word for knife.
The handle was not the only trouble he saw. Edges came back worn down or chipped, and blades came back spotted with rust. After enough of them, a sharpener knows which parts of a knife give out first.
From there, making knives was a short step. A knife is not finished until its edge is, and the edge was already his trade. For years he made practical kitchen knives the traditional way, and he kept the Kalcheonji name on all of them. His lines climb in steps, by the steel of the blade, its thickness, and the wood of the handle. The names are Korean words written in old Chinese characters: Cheonjido, roughly "heaven and earth knife," then Haejeondo, "sea battle knife," and at the top Daecheopdo, "great victory knife."
The Damascus knives came later, as his first premium series. His company presents them with a single line from Cho himself: "What is ours, we make best." The aim behind the line was a knife made in Korea, by a Korean maker, that could stand next to the imported knives on a serious cook's counter.
He has also made one knife with a much longer history behind it. In the Joseon court, the male cooks responsible for food at royal banquets were called daeryeong-suksu, a title usually read as "cooks who wait for the order." Cho made his own version of the knife those cooks used. It is thick, about four millimeters at the spine, with a tip that sweeps up like the toe of a beoseon, the traditional Korean cotton sock with its gently pointed front, and an eight-sided walnut handle.
In 2023 the Imperial Culture Society, a private royal-heritage group, issued a certificate recognizing it as a reconstruction of the court cooks' knife, along with a merit award. Even on this knife, the joint where blade meets handle is wrapped in stainless steel to keep moisture out. It is a heavy, specialist blade, though. The Damascus knives are the ones made for everyday cooking, and the clearest place to see a sharpener's habits in them is the handle.

Three Days to Fill a Handle
On Cho's octagonal wooden handles, the narrow end of the blade, called the tang, is pushed into a channel drilled into the wood. In many knives that opening is simply capped at the top, and the gap underneath stays hollow. Over years of washing, water can work its way into that gap and swell or loosen the wood from the inside. It is exactly the kind of failure a sharpener sees again and again.
Cho fills the gap completely. Resin is poured into the space around the tang and left to harden, then poured again, and the cycle runs for three days or more until nothing hollow is left inside the handle. Kalcheonji's own materials describe it as something he insists on for the sake of a finished knife, even though it is slow.
None of this shows once the knife is finished. From the outside you see a clean line of resin where the blade meets the wood, and nothing of the days behind it. A capped handle looks just as neat on the first day. The difference shows years later, when a capped handle can start to loosen and his has nothing inside for water to find.
The woods are chosen with water in mind too. The Ungyeoldo knives use ebony, a wood so dense and oily that it absorbs very little moisture, and the Heukcheopdo knives use rosewood, a hard, close-grained wood long used for fine furniture and instruments. Both are cut into eight-sided handles that sit securely in the hand and keep the knife from rolling on the counter. Some Ungyeoldo handles carry a thin band of red and blue, the two colors of the taegeuk at the center of the Korean flag. The blade gets the same kind of attention.
A Hard Core, Softer Layers, and an Edge Finished on Water
Every kitchen knife involves a trade between hardness and toughness. Hard steel takes a fine edge and keeps it a long time, but it can be brittle. Softer steel bends instead of breaking, but it dulls faster. A Damascus blade answers this by putting two kinds of steel into one knife.
Cho's knives have a core of VG-10-class steel, a stainless steel knifemakers value because it can be hardened enough to hold a fine edge. His blades measure about 60 on the Rockwell scale, the standard measure of a blade's hardness, which is harder than most Western-style kitchen knives. On its own, a core that hard could chip. So it is wrapped in many thin layers of softer stainless steel that give slightly under stress, with only a thin line of the hard core showing at the cutting edge.
The outer layers also keep rust away. On the darker Heukcheopdo line, Cho uses 73 layers of 316L, a marine-grade stainless steel that holds up even to salt water. The lighter Ungyeoldo line uses 67 layers of a standard stainless cladding. Either way, the knife does not need the constant drying that a carbon-steel blade does.
The layered steel arrives at his workshop as patterned stock. What Cho does with it is the craft: shaping the blade, fitting and sealing the handle, and finishing the edge on a wet stone by the method he patented for his sharpening business. Water matters here because grinding fast and dry heats a thin edge, and too much heat can soften the steel that was hardened to stay sharp. Grinding slowly under water keeps it cool and keeps the steel's full hardness.
The result is a knife that arrives very sharp out of the box and holds that edge longer between sharpenings. Because the edge is ground on both sides, it is also straightforward to maintain. A right- or left-handed cook can bring it back on a whetstone at home, the same way it was first finished.

Cooking With It, Day After Day
The first thing you notice is how light it is. The chef's sizes weigh between 143 and 178 grams, and the balance sits close to where your fingers pinch the blade. Tilt it toward a window and fine, wandering lines appear in the steel, a little different on every knife. The angled tip is for fine work, like scoring a fish or mincing garlic, while the flatter middle of the blade does the long push cuts through vegetables.
Then you cook with it. Halve a head of napa cabbage and the blade passes through the thick white ribs without catching. Slice scallions into thin rounds for a bowl of soup, and they stay round instead of getting crushed flat. Cut beef into the thin strips you would use for bulgogi, and the slices come off clean, without tearing. The octagonal handle keeps its place in your hand when your fingers are wet, and the knife stays where you set it down.
After a few weeks, a routine forms. You rinse it, wipe it, and put it away dry. If you forget it by the sink for a few minutes, the stainless layers will forgive you, and the sealed handle will not swell. Months later the edge starts to drag a little through a tomato skin, as every edge eventually does.
That is when the knife goes back to the stone. Ten minutes, a wet whetstone, slow strokes on each side, and the edge returns. Through all of it, the handle stays as tight as the day it arrived, with no water inside it.
Caring for It, and Why We Chose His Knives
A Damascus knife does not need special treatment, only a few habits. Wash it by hand with mild soap and dry it right away. Keep it out of the dishwasher, where heat and knocking are hard on both the edge and the wooden handle. Store it in a knife block, on a magnetic strip, or in a blade guard rather than loose in a drawer, and cut on wood or soft plastic, since glass and stone boards dull any edge quickly. If it will sit unused for a few weeks, a thin film of neutral oil on the blade is all the extra care it needs.
The one firm rule is not to ask it to do a cleaver's job. A blade this hard does not like frozen food, bones, or hard pits like mango seeds, any of which can chip the edge. Vegetables, fish, boneless meat, and herbs are what it is for. A honing rod between sharpenings keeps the edge straight longer, and more home cooks now keep a whetstone in the drawer rather than sending knives out, a habit this knife suits.
When people want a serious kitchen knife, most look to Japan, and Japanese knives have earned that reputation. Korea has knifemakers of its own, though few are known outside the country. We chose to introduce Cho Sang-jin at Kim'C Market because his knives are built around what he learned fixing other people's knives.
Search online and you will find plenty of Damascus knives listing the same numbers, 67 layers, a VG-10 core, around 60 on the hardness scale, often for a fraction of the price, but those numbers describe the steel, not the work done to it. With one of Cho's wooden-handled knives, you are paying for a named maker who finished the edge himself on a wet stone, and for a handle filled solid over three days instead of capped and left hollow. That difference shows up in year five, when the edge still comes back easily on the stone and the handle has not shifted. A chef's knife is the tool you pick up every single evening, which makes it the easiest place in a kitchen to pay for real work. Kim'C Market carries a small selection of his knives from both the Heukcheopdo and Ungyeoldo lines → Master Cho Sang-jin.
FAQ
Which Korean Damascus kitchen knife should I start with?
A chef's knife of about 210 millimeters, or 8.3 inches, is the most useful first Korean Damascus kitchen knife for most home cooks. It is long enough to halve a whole cabbage and nimble enough for a clove of garlic, so it covers most daily prep. A smaller utility knife is handy for fruit and detail work once you have a main knife. Master Cho makes chef's knives in both his Heukcheopdo and Ungyeoldo lines.
What's the difference between a handmade Damascus knife and a factory one?
A handmade Damascus knife is shaped, fitted, and finished by a maker one blade at a time, while a factory knife is produced in volume to a fixed finish. In Cho's knives, the difference shows most in two places. Every edge is finished slowly on a wet stone so the steel does not overheat, and every wooden handle is filled with resin over three days or more so water cannot get inside. Those steps take time, and they are aimed at a knife that stays sound for years.
Can I sharpen a Korean Damascus kitchen knife at home without special equipment?
A Korean Damascus kitchen knife can be sharpened at home with a whetstone and water. Soak a 1,000-grit stone for about ten minutes, then hold a low, steady angle and use slow strokes on each side in turn, since Cho's blades are ground on both sides. Keep the stone wet the whole time. Most home cooks need the stone only every few months.
What is resin inlay, and why does it matter for a kitchen knife?
Resin inlay is a way of sealing a knife handle by filling the gap around the tang completely with resin. Cho pours the resin, lets it harden, and repeats the process over three days or more until no hollow is left inside the handle. That keeps water from getting in and swelling or loosening the wood over years of washing. Because resin sets a little differently each time, the line where it meets the wood can vary slightly from knife to knife.
What do the Korean knife names mean?
Cho's knife names are Korean words written with Chinese characters, and they mark his lines from entry level to top. Cheonjido means roughly "heaven and earth knife," Haejeondo "sea battle knife," and Daecheopdo "great victory knife." His Damascus line Heukcheopdo follows the same pattern and means "black victory knife," named for its dark blade, and it comes with a rosewood handle. The other Damascus line, Ungyeoldo, is set in ebony.
What does daeryeong-suksu mean?
Daeryeong-suksu were the male professional cooks of the Joseon royal court. The title is usually read as "cooks who wait for the order," because they stood ready to prepare whatever the palace needed, including food for royal banquets. Cho Sang-jin made his own version of the knife these court cooks used, with a tip shaped like the toe of a traditional Korean beoseon sock. A royal-heritage society certified it in 2023 as a reconstruction of the court cooks' knife.